Wednesday, July 15, 2026
  • Login
  • Register
corruga.expert
  • All News
  • News Europe
  • News North America
  • Corruga Empire
  • Contacts
  • Advertising
No Result
View All Result
corruga.expert
  • All News
  • News Europe
  • News North America
  • Corruga Empire
  • Contacts
  • Advertising
No Result
View All Result
corruga.expert
No Result
View All Result

Metsä Board inaugurates Europe’s largest and most modern folding boxboard machine

16.04.2024
in All News, Folding Carton, Main, News Europe
A A
2
SHARES
247
VIEWS

“With the investment in the folding boxboard capacity at Husum (Sweden), Metsä Board is well positioned to meet the growing demand for fibre-based packaging materials,” says Mika Joukio, CEO of Metsä Board.

Mika Joukio (CEO, Metsä Board), Viveka Beckeman (CEO, Skogsindustrierna) and Jussi Linnaranta (Chair of Metsäliitto Cooperative Board of Directors) cutting the ribbon at Husum
Mika Joukio

“We are dedicated to supporting our customers with high quality and resource-efficient solutions that help replace fossil-based materials and support the circular economy.”

In 2016, Metsä Board started up a new folding boxboard machine, BM1, in Husum with a capacity of 400,000 tonnes/year. An investment of EUR 230 million was completed in 2023 to increase the annual capacity of the BM1 folding boxboard machine to respond to the growing demand for sustainably produced packaging materials that support the circular economy.

With an increased annual capacity of 600,000 tonnes of folding boxboard, the BM1 is Europe’s largest and most modern of its kind and is run with 98% renewable energy.

Husum Board and Pulp Mill

The project has included upgrades to the entire board mill as well as increasing the warehouse capacity at the port. The main parts of the investment are the extension of the board machine’s drying section, a new winder and an automated reel handling system. The new, fully automatic machine roll transfer and control system is unique in the paperboard industry.

Olov Winblad von Walter

“The combination of most modern available technologies with a very high degree of automation solutions gives us both a safer mill as well as lots of new improvement opportunities,” says Olov Winblad von Walter, VP of Husum Board and Pulp Mill.

Metsä Board Husum has undergone an extensive investment programme between 2019-2023. The first phase was completed in December 2022, including a new recovery boiler and turbine at the Husum pulp mill with an investment cost of EUR 380 million.

The new modern equipment and processes enables Husum mill to significantly increase bio-based energy production and energy efficiency, contributing to Metsä Board’s target of fossil free mills by the end of 2030. 

Metsä Board Husum mill in Sweden is an integrated board and pulp mill producing folding boxboard, uncoated white kraftliner and bleached chemical pulp.

corruga.expert

If you find an error, please highlight a piece of text and clickCtrl+Enter.

Tags: Metsä BoardMetsä GroupOlov Winblad von WalterМика Йоукио

Related Posts

Jussi Vanhanen Named New President and CEO of Metsä Group
All News

Jussi Vanhanen Named New President and CEO of Metsä Group

12.02.2025
Metsä Board to showcase circular packaging expertise at FachPack 2024
All News

Metsä Board to showcase circular packaging expertise at FachPack 2024

19.09.2024
WorldStar 2024 prize for Metsä Board’s innovative and eco-friendly pizza box
All News

WorldStar 2024 prize for Metsä Board’s innovative and eco-friendly pizza box

16.01.2024
Next Post
Mastering Backwards and Forwards Planning in Corrugated Manufacturing

Mastering Backwards and Forwards Planning in Corrugated Manufacturing

International Paper Confirms Acquisition Deal with DS Smith

International Paper Confirms Acquisition Deal with DS Smith

IXS-PAL® в Нидерландах

IXS-PAL® in the Netherlands


Popular

Top 10 Corrugated Board and Paper-Based Packaging Giants by Revenue: Who Controls the Global Market?

Top 10 Corrugated Board and Paper-Based Packaging Giants by Revenue: Who Controls the Global Market?

25.06.2026

Interview

South america is not a peripheral market anymore

South america is not a peripheral market anymore

29.06.2026

corruga.expert is an online project by Igor Tkalenko featuring everything useful for corrugated board manufactures and processors. News, analytics, technology, video reports from exhibitions and events - everything you need to know about corrugated board in one place. If you have any good news you would like to share or need help promoting your business, go to the professionals. Go to corruga.expert.

Welcome to Print4All Conference 2026 in Varese: Why Corrugated Producers Should Look Closely This Summer

Welcome to Print4All Conference 2026 in Varese: Why Corrugated Producers Should Look Closely This Summer

18.06.2026

Delays appeared. Questions multiplied. Trucks waited. Installation teams stood idle. Production schedules slipped. And every extra day cost money. Over many years of work and experience, we understand a simple truth: machinery relocation should not be a drama. What changed — and why it matters During these years, MachineryAssist has handled nearly 5,000 truckloads of industrial equipment. Dozens of corrugators, FFGs, RDCs, and many other types of oversized, specialized machinery. Every project taught us something new. Every challenge forced us to improve. Today, we complete many projects in nearly half the time that was considered normal a decade ago. For a manufacturer running a corrugator at full capacity, every month of downtime can represent $300,000–$600,000 in lost production. Getting back online two weeks faster is not a logistics detail. It is a financial decision. The case that changed how we think about equipment A few years ago, we relocated a BOBST die-cutter from a plant in Austria to a facility in Belgium. Standard job, on paper. The machine weighed in sections that exceeded what our equipment at the time could lift in a single pick. We had to break it down further than necessary — adding two full days of dismantling, complicating the reassembly sequence, and extending the commissioning phase. Projects like these pushed us to invest in portable high-capacity lifting equipment rated to 20 tonnes — four times the 5-tonne standard units. The difference in practice: large machine sections and complete sub-assemblies that previously required full disassembly can now be moved intact. On every comparable relocation since, we have recovered 10 to 15 working days per project. At a daily downtime cost of $15,000–$20,000 for a mid-sized corrugated plant, that is a difference of $150,000 to $300,000 — per project. The problems nobody warns you about Heavy machinery relocation is not just a logistics challenge. It is a minefield of invisible risks that hit from every direction — and usually hit hard. Licensing. In several European countries, crane operators require local certification to work legally on-site. We have seen projects where a contractor arrived with a qualified crew — only to discover that their licences were not recognised in that jurisdiction. The result: work stopped, a certified local operator had to be sourced on short notice, and the customer paid three days of idle time across an eight-person installation team. Cost: roughly $40,000 in delays and emergency sourcing fees. This is entirely avoidable — if you know to check. Opportunistic upgrades. A disassembled machine looks like an opportunity. Owners think: while it is in pieces, let us replace the worn parts, upgrade the drive system, add the sensors we always wanted. Sometimes that logic is sound. Very often it is not. We have seen upgrade decisions made mid-relocation that extended the project by four to six weeks, because the replacement components were not in stock, the modified machine required re-engineering of the installation footprint, or the new systems simply were not compatible with the existing line. The cost of one poorly timed upgrade can exceed the entire relocation budget. The rule we follow: if an upgrade was not planned, budgeted, and sourced before the machine left its original location — it does not happen during transit. What experience actually means There is a saying that moving is like experiencing two fires. We have spent the last decade learning how to make it feel like something far calmer — a well-planned journey with known checkpoints, documented risks, and people who have seen almost every failure mode before it happens. Experience is not only knowing how to do something. Experience is knowing what will go wrong before it does — and having already solved it. If you are planning a machinery relocation, we are happy to walk through your specific project: the equipment, the route, the timeline, the risks. No obligation. Because the best relocation is the one nobody remembers as a problem. MachineryAssist specialises in the relocation of heavy industrial and corrugated packaging equipment across Europe and beyond.

It Took Us Ten Years to Learn That Machinery Relocation Should Not Be a Drama

17.06.2026

Subscribe to corruga.expert

Contact Us
International Paper Buys NORPAC for $360M: Why Independent Corrugated Board Producers Should Pay Attention

International Paper Buys NORPAC for $360M: Why Independent Corrugated Board Producers Should Pay Attention

11.06.2026

No Content Available

Welcome Back!

Login to your account below

Forgotten Password? Sign Up

Create New Account!

Fill the forms bellow to register

All fields are required. Log In

Retrieve your password

Please enter your username or email address to reset your password.

Log In
Login

Register | Lost your password?

Register

Captcha loading...


A password will be e-mailed to you.

Log in | Lost your password?

Reset Password

Log in| Register

No Result
View All Result
  • Русский
  • Español
  • Українська
  • All News
  • News Europe
  • News North America
  • Corruga Empire
  • Contacts
  • Advertising
  • Login
  • Sign Up

Spelling error report

The following text will be sent to our editors:

Send Cancel